How to avoid and solve the problems of the floor

Floor, is where we stand, play an important role to form the beauty of space. That is why, in addition to beautiful, the floor should also be strong. Damage to the floor of course interfere with the beauty and dangerous to the residents. Floor strength depends on the material quality of floor coverings, floor adhesive or mortar and installation process.
Do not underestimate the damage to the floor, because in addition to endangering could also be causing other problems. For example, damaged bathroom floor can cause damage to the ceiling on the floor underneath.

How to solve floor problems

Damaged wood flooring.
Problem : The wood floor is damaged, such as hollow, porous, or dirty.
Cause : Incidentally, the less precise our behavior can lead to damaged wood floors.
Materials needed : number of needs and the appropriate type of parquet, cutting tools, special glue, elbow rulers, and rubber mallet.
Solution : Take out the damaged wood, and parquet dislodged when broken. Cut off the "tongue" that is left for parquet replacement can be inserted again. Spread glue on the side of the blade wood replacement. Put on to the floor that was damaged earlier, and then press gently using rubber hammer.

Bored with ceramic tile.
Wood floors are considered able to present the impression of a warm at room temperature. No wonder if people then want to apply it in the family room,master bedroom, and nursery.
Problem : The ceramic tile is dull or damaged in some places, and bored with the look of ceramic tile.
Cause : Bored with the ceramic tiles design and want to replace it.
Materials needed : a spoon of cement to clean up the remaining dry mixture, PE Foam, parquet.
1. A number of requirements, footing bridge / divider, a special glue, rulers elbow, and rubber mallet. You can replace with parquet ceramic tile using a floating system.
2. Cover the surface of the floor with the underlayer or PE Foam sheet and use a glue stick to the surface of the floor at the doorway. When will be made equally with other floor surfaces, the height of the floor that should be available is minus 17 mm.
3. If adjacent to another room floor tiles, install footing Bridge (barrier) in the doorway and then pakulah to the surface of thefloor.
4. Determine the starting point of the wood floor pattern, starting from the side which directly seen by the eye first .Install the appropriate width parquet pattern of working drawings (stacking bricks or random) on the sheet of PE Foam (without glued to the bottom).
Glue is only required to glue the tongue and groove on each connection width parquet.
5. Measure the neatness of the plot with a ruler elbow. Associate tongue and niche-which has been glued edges for each lock, then close the wide edge by tapping the parquet using multiplex plate and rubber mallet carefully for wood flooring is not disabled.